- 6 -
- 7 -
3-3 INSTALLING TO POLE
When installing the product to a pole, use the optional pole
mounting bracket (RLS-PB).
Take steps
and
2
in “3-” to remove the cover and
mounting bracket.
2
Fix the pole mounting bracket (optional) to the pole using 2
stainless belts (included in the pole mounting bracket).
Points >>
For detailed handling procedures, see the manual attached
to the pole mounting bracket.
3
Fix the mounting bracket to the pole mounting bracket.
For the fixing, use the screw with the washer attached to
the pole mounting bracket. Adjust the angle so that the
inclination in the horizontal plane becomes parallel to the
ground.
4
Take step
6
in “3-” to install and fix the main unit to the
mounting bracket.
5
Take steps
7
through
9
in “3-” to do wiring, check the
setup and operation, and then install the cover.
3-4 INSTALLING AT AN ANGLE TO WALL
OR CEILING PLANE
When installing the product at an angle to a wall or ceiling plane,
use the optional adjustable angle mounting bracket (RLS-SB).
Take steps
and
2
in “3-” to remove the cover and
mounting bracket.
2
When installing the product at an angle to a wall, attach the
paper template (attached to the main unit) to the wall and
drill 4 mounting holes in it in the same way as described
in “3-
3
.” For the ceiling plane, follow the procedures
described in “3-2
2
.”
Points >>
The mounting holes for the adjustable angle mounting
bracket must be provided in the same position, diameter
and depth as that for the main unit mounting holes
indicated on the paper template.
3
Fix the optional adjustable angle mounting bracket to the
wall or ceiling plane using 4 screws attached to the main
unit.
Wall
Ceiling plane
Points >>
For detailed handling procedures, see the manual attached
to the adjustable angle mounting bracket.
4
Fix the mounting bracket with 4 lock screws with the washer
attached to the optional adjustable angle mounting bracket.
Wall
Ceiling plane
5
Take step
6
in “3-” to install and fix the main unit to the
mounting bracket.
Wall
Ceiling plane
6
Take steps
7
through
9
in “3-” to carry out wiring, check
the setup and operation, and then install the cover.
Stainless belt
(included in the
pole mounting
bracket)
Pole mounting
bracket (optional)
The angle varies according to the bolt
insertion position.
The angle varies according to the bolt
insertion position.
45°
40°
30°
20°
30°
45°
40°
30°
20°
0°
0°
0°
45°
