Settings
[Selecting Functions]
q
Press and hold SET/ENTER button for one second or more in
the HOLD Mode (refer to page 8), and "SET" sign appears on
the LCD display. (Function selecting mode follows.)
w
By pressing CALL/
쑶
or MEM./
쑴
button, you can select func-
tions as shown in the right illustrations.
e
When the name of the function you desire appears on the dis-
play, press SET/ENTER button to set. Then, you can enter the
detailed setting mode.
"High Limit Temperature for Alarm" setting, refer to page 12.
"Low Limit Temperature for Alarm" setting, refer to page 13.
"Emissivity Ratio (DARK/BRIGHT mode)", "˚C/˚F mode" and
"Record Erasing" settings, refer to page 14.
"HOLD mode Selections" refer to page 15.
r
When each setting is completed, it automatically turns to the
next setting mode. (For example, when setting of "High Limit
Temperature for Alarm" is completed, it comes to the setting
mode for "Low Limit Temperature for Alarm".)
t
To quit the setting mode, press MEASURE button.
This section gives you an explanation on how to set the following functions: "High Limit Temperature
for Alarm", "Low Limit Temperature for Alarm", "Emissivity Ratio (DARK/BRIGHT mode)", "˚C/˚F mode"
and "Recorded Erasing" "HOLD mode Selections".
11
Setting mode for "High Limit
Temperature for Alarm"
Setting mode for "Low Limit
Temperature for Alarm"
Setting mode for "HOLD
mode Selections"
Setting mode for "Emissivity
Ratio (DARK/BRIGHT mode)"
Setting mode for
"Record Erasing"
Setting mode for "˚C/˚F
mode"
Ramco National
800-280-6933 | [email protected] www.optex-ramco.com
All manuals and user guides at all-guides.com
all-guides.com
