4-3 Powering the Unit
&
CAUTION
Old and new batteries
may not be
mixed.
Do not use lithium
batteries
for !VP-DU. Leakage or possible
explosion can occur.
Insert 3 x AA alkaline batteries.
Please ensure to match the c/- polarity as shown.
5. PAIRING WITH IVP-HU (Handheld Monitor Unit)
NOTE: One Handheld Monitor Unit (!VP-HU) must be configured to have
a HOME ID*1 prior to paring up with other devices. For setting up
a new HOME ID, refer to the Installation Instruction of !VP-HU.
A Handheld Monitor Unit bundled with Door Camera Unit already has
a HOME ID set up and paired up to each other. Proceed to OPERATION CHECK
unless additional pairing is required.
(1) Enabling Paring Mode of a Door Camera Unit (!VP-DU)
Press a PUSH button on the front then push pairing button located at the bottom
of battery compartment until the unit makes a beeping sound.
The Door Camera Unit will clear its HOME ID assignment and starts looking for
a New HOME ID. 5 short beeps will repeat until the unit is paired or
power /batteries displacement.
(2) Assigning a HOME ID to a Door Camera Unit (!VP-DU)
When a Handheld Monitor Unit in a paring mode, choose "SCAN" by pressing
Left Function Key. Door Camera Unit will automatically be assigned to a new
HOME ID and beeping will stop. Repeat the same procedure for an addition unit.
The first paired !VP-DU will be assigned as DUL The second paired !VP-DU
will be assigned as DU2.
NOTE: While the Door Camera Unit is in a factory default setting, the unit has
not been assigned to a HOME ID*l. When powering the unit, 5 short beeps
indicates its paring mode.
*1 HOME ID is an unique identification number for your system.
8. SPECIFICATION
8-1 Dimensions
70mm
I
2.76"
162mm / 6.38"
9. WARRANlY
40mm/ 1.57"
120mm / 4.72"
40mm
I
1.57"
I-----,
1. This product is warranted under normal use for 1 year from the date of purchase.
If the product proves to be defective, return it with a copy of your dated sales receipt
for repairs or replacement without charge.
2. The warranty is not applicable when below circumstances will be found:
- Mechanical or electrical modification(s) are made to the product
or it is otherwise altered manually.
- The product is already been at place(s) other than the manufacturer.
- It is determined that the product malfunction has resulted from improper use
or from an accident.
- No copy of the dated sales receipt has been submitted together with the product
to be served.
The Camera Door Unit may also be powered from an external power source.
If available, connect the unit directly to the existing AC/DC 10-24V doorbell power
supply or, alternatively, an AC/DC 10-24V third party's external power pack may be used.
c
�
Power
input
terminal
.
�
Pass the bell wire or the wire from a power
pack through the mounting plate before
fixing the plate to the wall. Connect the wire
to the Power input terminal.
&
WARNING
External power must not be used with batteries.
(1) Fix a Wall Mounting Base to a desired location
using four screws and anchors included in a package.
(2) On to the secured mounting base, hook upper rim
of the main unit and then, press in the entire unit.
(3) Tighten a screw at the bottom to secure the unit.
7. OPERATION CHECK
(1) Press "Push Button" on the !VP-DU and observe !VP-HU with a visual image.
(2) Carry !VP-HU away from the !VP-DU and Press "Answer" on the !VP-HU.
(3) Have another person speak to the !VP-DU and listen to the sound on !VP-HU.
(4) Speak back from the !VP-HU and listen from the !VP-DU.
If the !VP-DU is powered from the external power source, the Push Button glows
on the !VP-DU.
NOTE: Due to characteristics of 2.4 GHz radio waves, different locations in a home
may vary the performance of transmissions and receptions. Adjust positions of !VP-HU
to places where performance is desirable. If a distance between !VP-DU and !VP-HU
is close, two units may cause an howling effect when communication is in place.
8-2 Specification Table
MODEL NAME: OPTEX (!VP-DU) Door Camera Unit
Operating Temperature
- 20 to 50 degC (-4 to 120 degF)
Operating Humidity
< 90% RH (no condensation)
Warranty
1 year
Dust/Water Protection
IPX4 Splash Proof (Water Drain Structure)
Radiowave Frequency
2.4 GHz
Camera/Lighting Unit
Color vision / IR lighting LED
Power
Battery (3 AA Alkaline) or AC/DC 10-24V 3W (max)
Battery Life Expectancy
12 month *
* Based on 3 activations (approx. lOsec each) per day
