- 9 -
4-4. Walk test
4
Step
Detection area settings and walk test
4-5. LED indicator
[1] Warm-up
[2] Alarm
[3] Walk test end
60
2
5
Seconds
LED
1
Turn LED back ON, if it was turned OFF (
DIP switch No. 1
, Default ON).
Walk around the detection area to make sure it is set as intended.
If necessary, turn LED OFF again.
Fix the cover with the cover lock screw included in the housing,
after completion as necessary.
2
For the walk test, walk at least 1.0 m (3’ 3” ) away from the detector.
3
4
For confirmation, the LED will light up according to the alarm output for 3 minutes
after the detector cover is installed again in any setting.
Conduct a walk test at least once a year.
Caution
NOTE
