14
Main Menu
1.2 Manual Search
If you are familiar about digital TV and know the frequency of the program
or if you want to scan the program at any frequency required, you can select
manual scanning, which can save your much time.
1)
You can move the cursor to “area search” via press “UP/DOWN” key under
“installation menu”, then press “enter” to enter into area searching page.
2)
Prior manual scanning, you need to
configure relevant parameters
including:
1. Freq (KHz): the default
frequency is 474000KHz,you
can input relevant digitals to
modify it.;
2. Bandwidth: the default value of
bandwidth is 64MHz.while you
can set it to 6MHz, 7MHz, and
8MHz;
3. Press “ENTER” key after configuration of parameters to start manual
scan.
3)
If any program is detected and the scanning process is finished, system
will exit the scanning page and save the program.
1.3 Auto Search
You can search the programs of any
channel.
1) You can move the cursor to “area
search” via press “UP/DOWN” key
under “installation menu”, then
press “enter” to enter into area
searching page
2)
Prior to auto searching, you need to
configure relevant parameters
including:
1. Start Freq (KHz): the default frequency is 474000KHz. You can input
relevant details to modify it;
2. End Frequency (KHz): the default frequency is 474000KHz. You can
input relevant details to modify it;
3)
Press “ENTER” key after configuration of parameters to start manual scan.
