21
10.
XSNet 2800 SW Port Settings
While in a network, enabled ports in the 2800 SW will have to use a link mode compatible with ports of
connected devices. This can be done by selecting auto-negotiation (see the ‘link mode’ column in the table
below) or by setting duplex/half duplex and link speed per port manually. The negotiation results appear in the
speed, duplex and pause (the switch is able to send and receive pause frames) columns. If auto-negotiation is
used, enabling, sending and receiving of pause frames is automatic.
Note however that the high-speed ports 9 and 10 only offer auto-negotiation or, if this is set to off, the fixed
setting 1 Gbit full duplex.
Figure 20. XSNet 2800 SW port/link settings