Oppo BDP-80, User Manual

Page: 54 / 76

S E T U P M E N U O P T I O N S
48
•
YCbCr 4:2:2 –
The HDMI output uses YCbCr 4:2:2 color space. Generally this is the color
space that is closest to the color space encoded on the discs. (All discs are encoded in
YCbCr 4:2:0 color space, and the video decoder decodes it into YCbCr 4:2:2.)
8.
HDMI Deep Color:
Deep Color is an OPTION for some TVs or projectors that feature HDMI
v1.3 inputs. Normally, each pixel of the video image is transmitted using 24-bit data (8-bit per
channel for R, G, B or Y, Cb, Cr). If Deep Color is supported, each pixel of the video image can
be transmitted using 30-bit (10-bit per channel) or 36-bit (12-bit per channel) data. The
increased bit depth should result in smoother color transitions and better gradients. The
available options are:
•
30 Bits –
Use the 30-bit per pixel Deep Color mode.
•
36 Bits –
Use the 36-bit per pixel Deep Color mode.
•
Off (default)
– Do not use Deep Color.
NOTE
Since the Deep Color feature is OPTIONAL and may not be supported by all TVs, enabling
Deep Color while connected to a TV without this feature may result in no effect or no video.
At this time, no disc is encoded with Deep Color. Enabling Deep Color will not magically
make colors richer, but will help preserve the maximum precision as a result of video
processing and picture control adjustment.
9.
Display Options:
To configure the options for displaying on-screen information. The following
display options are available:
•
Subtitle Shift
– To set the display position for subtitles. When the “Subtitle Shift” is set at 0
(default), subtitles are displayed at the original position as specified on the disc. When it is
set at a value between 1 and 5, subtitles are shifted up. When it is set at a value between -
1 and -5, subtitles are shifted down. This feature is helpful to customers using a 2.35:1
“Constant Image Height” video projection system. Subtitles can be shifted to the active
video area so they do not get cut off.
•
OSD Position
– To set the display position for on-screen display (OSD). When the “OSD
Position” is set at 0, OSD is shown at the top and bottom of the video screen. When it is set
at a value between 1 and 5, OSD is shifted towards the vertical center line of the video
screen. Similar to the subtitle shift setting above, the “OSD Position” feature is helpful to
customers using a 2.35:1 “Constant Image Height” video projection system.
•
OSD Mode
– To select how long the on-screen display information, such as elapsed or
remaining time, stays on the TV screen. The available options are:
•
Normal
– On-screen display information stays on the TV screen until the user cancels
it.
•
Silent
– On-screen display information shows on the TV screen for a few seconds and
then disappears. The front panel display still maintains the selected display
information.
•
Remaining
– On-screen display information stays on the TV screen until the user
cancels it. By default display remaining time instead of elapsed time.
•
Angle Mark (on/off)
– To turn on/off the display of an angle mark when a DVD or Blu-ray
Disc with multiple available angles is played. Keeping the angle mark off avoids distraction
from normal movie watching.