Opitec 117.330, Instructions Manual

Page: 1 / 15

1
117.330
LED-Tree
Contents List: Qty: Size (mm): Designation: Part No.:
Plywood 1 70x70x6 Base Frame 1
Wooden Strip 2 200x30x5 Side Parts Frame 2
Wooden Wheel 3 ø30x8 Spacer Pieces 3
Wooden Wheel 4 ø20x6 Spacer Pieces 4
Wooden Ball with Hole 1 ø15 Top of the Tree 5
Coloured Card, 3 DIN A4 Tree Elements 6
LED, yellow 18 ø5 Lighting 7
Small Slide Switch 1 19x6 On/Off Switch 8
Resistance 10 Ohm 1 Resistance 9
Welding Wire 1 200x4 Tree Trunk 10
Battery Holder, 2x Mignon AA 1 Battery 11
Jumper Wire, black 1 1000 Cabling 12
Jumper Wire, red 1 2000 Cabling 13
Washer 3 Contact 14
PVC Hose, transparent 1 100 Spacer Pieces 15
Tools Needed
Scissors
Wood Glue
Please Note!
The Opitec Range of projects is not intended as play toys for
young children. They are teaching aids for young people
learning the skills of craft, design and technology. These pro-
jects should only be undertaken and operated with the
guidance of a fully qualified adult. The finished projects are
not suitable to give to children under 3 years old. Some
parts can be swallowed. Danger of suffocation!
Ruler
Pencil
Jigsaw Drill
Sandpaper Hot Glue Gun
Engineer´s File
ø2
ø5
Soldering Iron Side-
Cutter
Adhesive Tape
All Purpose
Glue