Opitec 117.330, Instructions Manual

Page: 3 / 15

3
7
8
Part 1
Part 2
Part 3
Part 4
Part 5
Part 6
9
12
1
2a
2b
2a
10
2b
3
4
ø2
11
10
8
ø2
Place a ruler to all solid lines and fold them. After that turn the star and fold all
dashed lines as well.
Fold all parts 1-6 as described in step 7.
Instructions 117330
LED-Tree
Glue a wooden wheel (4) on a wooden wheel (3) as shown. Look to it that the holes
are exactly above each other. (Check with the welding wire!)
Deburr the welding wire (10) at both ends with a engineer´s file. Then insert the
welding wire (10) into the hole (ø 4mm) as shown, so that it extends 20mm into the
base frame. .
Glue the switch (8) into the opening of the base plate (1). Agglutinate the complete
base out of the parts 1, 2a, 2b as shown. Let it dry well.
After drying glue both wheels centrical on the base. Drill the 2mm hole at a distance
of 5mm to the center of the wooden wheels as shown.