Opitec 117.330, Instructions Manual

Page: 2 / 15

2
1
2
ø2
ø4
1
2x
3
4
6
2a
2b
Measure and mark 70mm as well as 80 mm on both wooden strips (2). Cut the
wooden strips and clean the saw cuts.
Cut the template (page 9) and glue the template with adhesive tape on the base (1).
Instructions 117330
LED-Tree
Transfer or glue the template (page 11) to a DIN A4 side of the coloured card and cut
the stars with a scissors along the line.
Transfer or glue the template (page 13) to a DIN A4 side of the coloured card and cut
the stars with a scissors along the line.
5
Part 3
Part 4
Transfer or glue the template (page 15) to a DIN A4 side of the coloured card and cut
the stars with a scissors along the line.
Fold part 1-6 in the middle and cut out a semicircle (ø 4mm) or a triangle (4 mm)
with a scissors.
Part 1
Part 6
Part 2
Part 5