4
E114066#1
Instructions
Step 13:
Cut off two ca. 200mm long pieces of cab-
le (16) remove insualation from the ends.
Connect one piece to the red wire from
the motor with the red cable of the motor
and the other end to the pus pole on solar
cell (15) The other wire cionnectsfrom
the black cable of the motor to the other
connection on the cell (15) . Fix the wire to
the stand with sellotape.
Step 14
Loosen the nut (14) from the machine
screw (13) and guide the ball for the pilot
in place.. retighten .
Step 15:
Paint to finnish. Place the model in a sun-
ny place and as soon as enough light falls
on the solar cell the propeller will turn.
Fertig!
