2
E114066#1
200
200
260
120
Ø
3
Ø 6
ø3
20
Step 1:
Instructions
Cut out the patterns (Page 5/7) for the aeroplane and glue them
together along the broken line. Transfer (see diagram) the plans
on to the aluminium sheet (1)
Drill all the marked holesand cut out the parts with metal shears
or afretsaw with a metal working blade
Clean up all the parts with file and remove any burr
a
b
c
d
e
Step 2:
Fold the parts (a-d) as shown, use a vice with soft jaws or
folding bars.
Note: Bend in the correct direction!
a
b
c
d
Step 3:
Trace the patterns for the stand ( page 9) on to the plywood
sheet(2) . Drill the 3mm holes in the base part (f) Use a counte-
sink on the 6mm dia holes. Cut out all the parts with a Fretsaw
and sand to finish.
f
g
i
h
Step 5:
Mount the wings (Parts b/c) as shown using the machine screws (11)
M3x35 and nuts (13) to the fuselage body (Part a) ( straight edges on
the wings point backwards.)
straight edges
Step 4:
In the stand (g) (see patterns) drill the ø3,5 mm ca. hole 20mm
deep. Finally add the ball (4) ø 25mm with a screw (10) 4x40mm
in part (g)
Part (f) with screws (9) ø 3x20mm from underneath (g) (The
countersink holes are underneath!)
Flat edges
ø 3,5mm
g
f
