3
E114066#2
Instructions
Step 6:
The tailpane (Part e) and the tail fin
(Part d) are fitted using two screws
(12) and 2 nuts (13) on the back of the
fuselage (a)
Step 7:
The wooden parts (i/h) are glued
together as shown on page 5/7 as
marked, use an all purpose glue!
Schritt 8:
The wooden ball (3) once all the parts
(i/h) are on the body (a) is fitted with an
all purpose glue.
Schritt 9:
The spring clip (6) is fitted as shown
with a machine screw (12) and a nut
(13) in place
Schritt 10:
Place the motor (7) with spindle to the
front, in the spring clip (6)see diagram
Cut out and fold the cockpit shape from the plastic sheet(5). Fix the parts together with sellotape (see diagram)Use sellota-
pe to hold it on the fuselage .
Step 12:
Pattern for the cockpit
Scale 1:1
Step 11:
Mount the propellor on the motor
spindle (8) as shown
