RealMom
copyright © 2018 Operative Experience
10002_A
9
All rights reserved
Using the Tablet
As the instructor, you use the tablet to control the simulation, and as the trainee, you’re able to use the
second tablet (or the projected image) to view RealMom’s physiological condition (as well as the fetal
heart rate).
To learn more about the possible physiological settings, see
Understanding the OEI Sim Application
below.
Controlling the Simulation with the Instructor Interface
To control the simulator with the
Instructor Interface
tablet:
1.
Power on the simulator by holding down the button on the right shoulder for approximately two
seconds or until the blue light comes on.
2.
Power on the tablet.
3.
Connect the tablet to the simulator’s Wi-Fi (see
Configuring the Wireless Connection
above).
4.
Start the OEI Sim application.
5.
Using the OEI SIM APP set those Physiological Controls appropriate to begin the simulation
(remembering that not all controls are needed for every simulation).
6.
Press
Play
to begin the simulation.
7.
During the simulation adjust those Physiological Controls appropriate to the scenario.
8.
Press
Stop
to end the simulation.
9.
Click
Yes
on the dialog box that appears requesting verification that you wish to end the simulation.
10.
Power down the simulator by holding down the button on the right shoulder for approximately four
seconds. The blue light flashes on and off momentarily before turning off.
All the settings and adjustments you make during the simulation are displayed in the
Simulation Log
and
remain in the history stored on the Simulation Logs page.
Viewing RealMom’s Condition Using the Trainee Interface Tablet
1.
Power on the tablet.
2.
Connect the tablet to the simulator’s Wi-Fi (see
Configuring the Wireless Connection
3.
Start the OEI Sim application.
4.
From the
Menu
, select
Settings
.
5.
On the Settings page, under
Control Interface Type
, select the
Trainee
option from the drop-down
menu for the
Interface Type
.
