•
Tighten the screws previosuly reduced to
complete the installation. Make sure the striking
parts are free to move and do not hit parts of
the door or obstruct the bar mechanism.
Cable has not to be damaged or pressed.
MODE OF OPERATION
Direct activation with power supply (without time delay)
40620 serie
When the electric handle is disabled (in neutral), the red LED is on. Without power,
the LED turns off and the handle enables the door opening as long as power is OFF.
40820 serie
When the electric handle is disabled (in neutral), the green LED is off. Power supply
enables the door opening and green LED turns on as long as power is ON.
Attention:
time delay has to be set at 0 seconds for items code 40621 and 40821.
It is possible to use both the lead cover and the pressure contacts.
Activation with dry contact (with time delay)
40621 – 40821 series
When the electric handle is disabled (in neutral), the red LED is on. Handle enables
door opening once the opening switch is pressed and released and the green LED is
on for the setted time (from 5 to 60 seconds) or until the first activation of the handle.
To reopen the door, the opening swicth has to be pressed again.
The use of a lead cover si recommended.