background image

ACTIVATION AND DEACTIVATION OF THE LOWER WHITE/BLUE LED's

LIGHTING 

(40621 – 40821 versions only)

Electric handle serie 40621 and 40821 has a blue (electric handle disabled) and a 

white LED (electri handle activated) on the lower part which create a light beam near 

the floor. 

White/blue LED's deactivation

1. Connect the N.O. programming switch (not included) to the blue and to the green

wire of the ground singals (GND). 

2. Press the programming switch when the electric handle is deactivated. 

3. Connect the handle to the power supply, keeping the switch pressed. 

4. Blue   LED   light   will   flash   twice   and   it   will   then   become   red.   Releasing   the

programming switch, LED will flash twice confirming the white/blue lower lighting

deactivation. 

White/blue LED's activation

1. Connect the N.O. programming switch (not included) to the blue and to the green

wire of the ground singals (GND). 

2. Press the programming switch when the electric handle is deactivated. 

3. Connect the handle to the power supply, keeping the switch pressed. 

4. Blue   LED   light   will   flash   twice   and   it   will   then   become   red.   Releasing   the

programming switch, LED will flash twice confirming the white/blue lower lighting

activation. 

Summary of Contents for 40620













Reviews: