OpenScape CP200 Page 67 User Manual Download

Page: 67 / 155

LED displays

Incoming calls

Depending on your individual settings, you will be notified of incoming calls



page 84.

Answering calls for the primary line

In this case, the telephone behaves in the same way as a single-line telephone



page 32.

Answering calls for secondary lines

Prerequisite:

The secondary line is configured on your multi-line telephone.

Using the handset

Lift the handset.

[

Conduct call.

Using the line keys

Press the flashing line key. Speakerphone mode.

Confirm the option shown. Speakerphone mode.

LED

Meaning

LED off

: The phone is in idle mode.

Flashing green

• Incoming call on the line



page 67

• "Hold reminder" is activated



page 108

LED flickering green

• Outgoing call on the line
• The incoming call was prioritized and selected in accordance with

the "Automatic line selection for incoming calls" option

Fast blinking

: The line is on "Hold".

Flashing

: Call forwarding is activated

LED lights green

: The line is busy.

LED lights orange

: The line is on "Hold".

The line that rings is automatically selected. If calls are ringing on more
than one line, you will be connected to the line that has been ringing the
longest.

Line 1

Accept?

Summary of Contents for CP200




























































































































































Search results

Summary of Contents for CP200

Reviews:

Related manuals for CP200

Brands by name

Popular brands

OpenScape CP200, User Manual

Search results

Summary of Contents for CP200

Reviews:

Related manuals for CP200

Brands by name

Popular brands