OpenScape CP200 User Manual Download Page 32

Page: 32 / 155

Making calls

Incoming calls

The telephone rings if the ringtone is active. The LED de notificação also flash-
es. If transmitted, calling party information (name, phone number) appears on
the display.

Answering a call via the handset

The phone rings. The caller is displayed.

Lift the handset.

if nec.

Adjust the call volume.

Answering a call via the loudspeaker (speakerphone
mode)

The phone rings. The caller is displayed.

The

key flashes green.

Confirm the option shown.

The

key lights up green.

Press the key shown. The key illuminates. The speakerphone function is activat-
ed.

if nec.

Adjust the call volume.

Suggestions for using speakerphone mode:

• Adjust the call volume while speakerphone mode is active.
• The ideal distance between the user and the phone in speakerphone mode is

50 cm.

Any settings you are currently making on the phone will be interrupted by
an incoming call. You can use the

key at any time to return to the

point in the menu where you were interrupted, unless the time for the pass-
word has expired.

If you have set a pattern melody



page 85 or a ringer



page 73 on your

phone, it is possible that your administrator may have preset a different
ringer depending on the call type (e.g. an external or internal call).

If the phone number is stored in the local telephone, the associated name
is shown on the display (must be activated by the administrator).

Accept?

Summary of Contents for CP200




























































































































































Search results

Summary of Contents for CP200

Reviews:

Related manuals for CP200

Brands by name

Popular brands

OpenScape CP200, User Manual

Search results

Summary of Contents for CP200

Reviews:

Related manuals for CP200

Brands by name

Popular brands