32521AD
53
Use this function to activate a PTZ camera to move to a preset position when a sensor event is
detected.
1.
Click
Sensor / Preset
.
2.
Select the camera
Channel
you want to configure.
Note
The camera channel must be a PTZ camera.
3.
Select the appropriate
Sensor
.
4.
Select the appropriate
Preset
position for the camera to move to when the selected Sensor is
activated..
Note
The preset positions must be configured on your camera. Refer to the camera manual for
instructions.
5.
Click
Set
.
6.
Select a different
Sensor
and
Preset
combination, and then click
Set
.
7.
Repeat for all of your desired sensors.
8.
To delete a Sensor-Preset combination, select the combination in the list, and then click
Delete
.
9.
Click
OK
.
