14
These are instructions that will allow you to operate the basic features of the EasyNVR. Use these to
record to your EasyNVR, allow remote access over a local network, and set up passwords for
authorized users. For further instructions, setup details, and configuration tools, please see the
information presented in the rest of this manual.
1.
Establish necessary cable connections and power on the recorder.
2.
Click SETUP in the hover menu at the top of the screen.
3.
When prompted for the admin user password, use the on-screen keyboard to type
1234
, then click
the
OK
key.
4.
On the hover menu, click
Settings.
5.
In the
System Setup
tab, click
Date/Time
, then verify or modify the correct date and time.
6.
Click
Network Setup
and configure network settings. DHCP is enabled by default.
7.
If the IP address needs to be static, turn off DHCP by clicking the toggle button and enter the
IP
,
Netmask
,
Gateway
, and
DNS
for the network.
8.
In the
Management
tab, click
Account Setup
, and then change the admin password or create new
users.
9.
Click
Close
at the bottom right of the screen to return to Live view.
Default administrative log in information:
Username:
admin
Password:
1234
