31186AA
53
Maintenance
On the Maintenance page you can export the cameras current configuration, or import the
configuration for a camera. Use the factory default page to reset the IP Camera to factory
default settings if necessary.
Note
Do not import configuration files from different models of cameras.
Set Default
–To reset the IP camera to the factory default settings, including the default IP
address, click Set Default. The system will restart after 30 seconds. If you cannot access
the camera menu, you can return the camera to the factory default settings by holding
down the reset button on the camera connection board for 30 seconds. See
Connections
for the button location.
Reboot
– To restart the IP camera without changing the current camera settings, Click
Reboot.
Export
– You can save the system settings by exporting the configuration file (.bin) to a
specified location for future use. Click
Export
, then
Save
, and specify the desired
location.
Upload
– To copy an existing configuration file to the IP camera, click
Browse
, select the
desired configuration file, then click
Upload
.