31186AA
25
Changing the Network Type
You can change the network type from Static IP to DHCP easily from the list of connected
IP devices. To change the network type to DCHP:
1. On the list of connected IP devices locate the desired camera and record the
MAC
address,
2. Right-click the camera row and select
Network Setup
.
3. Select the
DCHP
option on the
Network Setup
window and then click
Apply
.
4. Click
OK
to acknowledge the change.
5. After one minute, click
Device Search
to search for all connected IP devices.
6. Locate the camera using the
MAC
address recorded earlier and double click the
camera row.
7. Type the
Username
and
Password
to access the camera.
SETUP & CONFIGURATION
CONNECTING TO THE CAMERA
1. Locate the camera on the
IP Finder
list.
2. Double-click the camera to open the Viewer software in your web browser.
3. Log in to the camera with the appropriate
User Name
and
Password
.
Note
The default User name is Admin and the default Password is1234. The
username and password are case sensitive. OpenEye recommends you change
the Admin password for security reasons.
Resetting the Camera
If it is necessary to reset the camera to the factory default settings, hold down the Reset
button (see
Connections
) for 30 seconds. This will return all settings, including network
setup, to the factory default. The IP address of the camera will return to 192.168.0.250.
Administrator/User Privileges
The Administrator account has the authority to configure the IP camera and authorize
users’ access to the camera. The User accounts have access to the camera with limited
authority.