40
•
Record Stream to SD Card
– Select the item and the alarm-triggered recording will
be saved to your micro SD card. The pre-trigger buffer recording option allows users
to check what happened to trigger the alarm. The pre-trigger buffer time range is
from 1 to 3 seconds. Select
Upload for ___ Sec
to set the recording duration after
the alarm is triggered. Select
Upload During Trigger Active
to record until the alarm
is off. Local recording needs to be activated in order for this function to be
implemented.
•
Upload Image by E-Mail
– Select to assign an e-mail address. When the alarm is
triggered, event images will be sent to the configured e-mail address.
•
Send HTTP notification
– Select this item, select the destination HTTP address, and
specify the parameters for event notifications when an alarm is triggered.
Note
Make sure SMTP or FTP configuration has been completed. See the Mail and
FTP section of this manual for further details.
File Name
– Enter a file name in the box, ex. image.jpg. The uploaded image’s file name
format can be set in this section. Please select the one that meets your requirements.
•
Add date/time suffix
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number
•
Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number
•
Add sequence number suffix (limited value)
File Name: imageXX.jpg
X: Sequence Number
The file name suffix will end with the value entered in this box. For example, if the setting
is up to “10,” the file name will start from 00, end at 10, and then start all over again.
Overwrite
– The original image on the FTP site will be overwritten by the new uploaded
file with a static filename.