OpenEye CM-610 Quick Start Manual Download Page 9

4. 

Click 

Add

 to add the camera to the 

Device List

.

Install Server Software

To view and record the OpenEye IP cameras with your OpenEye recorder, you need 
to install the latest version of the OpenEye server software. From the main menu 
of the software disc, click 

Utilities

 and then click 

Install Server Software

. The 

software installer will install the latest server software version. Follow all on-screen 
instructions to complete the installation. 

Server Setup

Add the IP cameras to the OpenEye recorder using the 

Manual Device Entry

 or 

Automatic Device Entry

 instructions. 

Tip:

  Watch the training video 

Adding an IP camera

 on the included  

software disc.  

Manual Device Entry

1. 

 On the OpenEye recorder main screen, click 

Setup

, and log in as an 

authorized user.

2. 

Click 

Network Cameras

.

3. 

 Select your camera from the 

Device Type

 list and type a 

Device Name

IP

 

address 

User ID

 and 

Password

 for the camera. 

 

Note:

 If you changed the default connection port on the camera you also need 

to change the 

Port #

 here as well. The camera’s default login is: 

User:

 Admin 

Password:

 1234 

Device Setup

1. 

 Click  the 

Channel Setup

 tab, and then click 

Drag and Drop Cameras

.

2. 

Drag the cameras to the channel numbers that you want each assigned to on 
the recorder.

3. 

Click 

Apply.

 

5. 

 Repeat 

step 3

 for all remaining cameras. When all cameras are 

added, continue with the 

Device Setup

 section. 

Automatic Device Entry

1. 

  On the OpenEye recorder main screen, click 

Setup

, and log in 

as an authorized user.

2. 

Click 

Network Cameras

.

3. 

 Click 

Find Cameras

.

4. 

 Select the check box next to each camera that you want to 
add to the device list.

5. 

Type the 

User ID

 and 

Password

 for each camera.

6. 

Click 

Get Device

 to add the cameras to the device list.

7. 

  When all cameras are added, continue with the

 

Device Setup

 

section.

Need help? Contact our Virtual Support Hotline

 Phone: 

888-542-1103

Email: 

[email protected] 

FAQ: 

faq.openeye.net

 • 

Web: 

www.openeye.net/12ip

page 16

Need help? Contact our Virtual Support Hotline

 Phone: 

888-542-1103

Email: 

[email protected] 

FAQ: 

faq.openeye.net

 • 

Web: 

www.openeye.net/12ip

page 17

CONFIGURE 

page 16

c

Summary of Contents for CM-610














Reviews: