OpenEye CM-610, Quick Start Manual, Page: 5 / 13

Configuration A Instructions
Caution: Running the installation disc will overwrite all settings on
your OpenEye recorder. If you have already changed settings on your
recorder and want to save your existing configuration, you need to
use the
CONFIGURE C section of this document.
To configure a new OpenEye recorder and camera kit with no other connections.
1. On the main screen of your OpenEye recorder, click Exit .
2. Select
Restart in Windows Mode
to go to the Microsoft
®
Windows
®
desktop.
Note: If you have not already done so, log in as an authorized user. The
recorder’s default login is:
User: administrator
Password: <blank>
3. Insert the software disc included with the IP camera kit. The disc should auto-
run. If it does not, open Windows Explorer, browse to the CD Drive and then
double-click
OpenEye.exe
4. Click
Click Here to Start
on the CD menu to start the setup
process.
5. Follow the on-screen instructions to select your camera kit and
install the cameras on your recorder. When the setup wizard
asks
Select your Installation Type
, select
Type A
and
then click Next .
Note: The setup wizard will now configure your OpenEye recorder software.
You must restart your OpenEye recorder to complete the installation. You will
not be able to see the IP cameras until the recorder is restarted.
6. Click Finish to restart your OpenEye recorder.
Need help? Contact our Virtual Support Hotline Phone: 888-542-1103 Email: support@openeye.net FAQ: faq.openeye.net • Web: www.openeye.net/12ip
page 8
Need help? Contact our Virtual Support Hotline Phone: 888-542-1103 Email: support@openeye.net FAQ: faq.openeye.net • Web: www.openeye.net/12ip
page 9
CONFIGURE
a
page 8