Your kit includes Cat5 network cables so you can connect and configure the
cameras, switch and recorder prior to the actual installation. OpenEye highly
recommends this approach as it will simplify the overall process by having all
equipment close at hand during the connection and configuration process. After all
the devices are working properly, you can unplug them and install them in their final
locations.
Connect Your Devices
Connect power to switch
Connect power to recorder
Connect cameras to ports 2~5 (4 camera kit) or
1~8 (8 camera kit) on the included switch
Connect recorder to port 1 (4 camera kit) or
port 25 (8 camera kit) on the included switch
If using Installation B or C, connect switch to network using any
available port (6-24 depending on model)
Tip:
The cameras
included in the 1-2-IP
camera kit are powered
by Power over Ethernet
(PoE). PoE allows you
to power your cameras
using the Cat5 cable and
a PoE compatible switch.
Power on recorder
CM-610
CM-710
page 7
SELECT
Need help? Contact our Virtual Support Hotline
Phone:
888-542-1103
Email:
FAQ:
faq.openeye.net
•
Web:
www.openeye.net/12ip
page 6
page 7
CONNECT
Email:
FAQ:
faq.openeye.net
•
Web:
www.openeye.net/12ip
Need help? Contact our Virtual Support Hotline
Phone:
888-542-1103
page 6