10
4.3.4 Spectrum
Main Menu->Terrestrial ->Spectrum
In this menu, you can know the strength of all transponders.
Note: After insert USB, you can press OK button to save
or load the data of spectrum. If you select saving the
data, you can press OK button or exit button to close the
save. Thenyou can find “spectrum_file_001.txt “in your
USB. If you select Loading, you need to load
the”spectrum_file_001.txt”in your USB, and then you
can see the previously saved spectrum data.
-Hold: Press the F1 button to keep the spectrum.
-
◄
/
►
:Change the transponder
-▲
/
▼
: Change the range of the Y-axis.
-F3 (Mark/conf): Setthe center TP, thetransponder of
span and the range of the Y-axis.
-F4 (Power): Setvoltage for T tuner to 0V, 5V, 12V.
4.4
CATV
Main Menu->CATV
Press OKbuttontoenter the CATV menu.
4.4.1 TP Search
Main Menu->CATV ->TP Search
In this menu, you can Delete, Add, Search Channels.
-TP:Highlight the TP, press the
◄
/
►
button to switch TP or press the ok button to enter TP list, then select TP.In the TP list,
you can press the
◄
/
►
button to switch TP one by one, and press
▲
/
▼
button to Page up/down TP list. You also can enter
channel number to select TP.
-Search Channel: Pressthe
◄
/
►
button to change search type, you can select manual search, network search, autosearch,
blind search.
-Delete: Highlight the TP and select the TP,then press F1 button to delete TP
-Add: PressF2 button to add TP.
-Manual Search:Press F1 button to search channels from the selected TP.
-Auto Search:PressF4 button to search channels of all TP.
-Network Search: It will go to search automatically from the selected TP.
-Blind Search: A slow scanning, but may get more transponders.
4.4.2 TP IDE.
Main Menu->CATV ->TP IDE.