Opel 2016 Mokka Owner'S Manual Download Page 54

Page: 54 / 233

Seats, restraints

: move front passenger seat to the foremost position or adjust front seat backrest inclination as far as necessary to

a vertical position to ensure that there is no interference between child restraint system and front seat backrest.

IL : suitable for particular ISOFIX restraint systems of the "specific-vehicle", "restricted" or "semi-universal" categories.

The ISOFIX restraint system must be approved for the specific vehicle type.

IUF : suitable for ISOFIX forward-facing child restraint systems of universal category approved for use in this weight class.

: no ISOFIX child restraint system approved in this weight class.

ISOFIX size class and seat device

A – ISO/F3

: forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg

B – ISO/F2

: forward-facing child restraint system for smaller children in the weight class 9 to 18 kg

B1 – ISO/F2X : forward-facing child restraint system for smaller children in the weight class 9 to 18 kg

C – ISO/R3

: rear-facing child restraint system for children of maximum size in the weight class up to 18 kg

D – ISO/R2

: rear-facing child restraint system for smaller children in the weight class up to 18 kg

E – ISO/R1

: rear-facing child restraint system for young children in the weight class up to 13 kg

Summary of Contents for 2016 Mokka










































































































































































































































Search results

Summary of Contents for 2016 Mokka

Reviews:

Related manuals for 2016 Mokka

Brands by name

Popular brands

Opel 2016 Mokka, Owner'S Manual

Search results

Summary of Contents for 2016 Mokka

Reviews:

Related manuals for 2016 Mokka

Brands by name

Popular brands