©Copyright by Opale-‐Paramodels 2011 v1.0
Page
6
/
12
•
Front wheel mounting
To go through this steps you will need:
•
1x Already assembled wheel
•
1x HSHC M5-40 screw
•
1x Nylstop M5 nut
Do not hesitate to push the spacer rings aside to limit the
play between the wheel and the frame before mounting the
wheel.
•
Rear wheels mounting
To go through this step you will need:
- 2x Already assembled wheels
- 2x Nylstop M5 nuts
Insert the wheel on the axle turning it clockwise till it
stops. Keep turning it to make sure it rotates freely.
The trike is now equipped with its 3 wheels as shown
on the picture below:
