background image

   

©Copyright   by   Opale-­‐Paramodels   2011   v1.0   

   Page   

2

   /   

12

   

   
   

Thanks for having chosen an Opale-Parmodels product. We truly believe this radio-controlled paraglider is going to 
give you hours of enjoyment and will enable you to go through new outstanding piloting experiences. 
This user’s guide content includes all the information you need to get your wing fly and to ensure you will take good 
care of it. A good knowledge of your equipment will allow you to safely make the most of its performances for your 
greatest pleasure! 
Thanks for giving this manual to the new owner in case you decided to sell you radio-controlled paragldier. 
 
Best regards, 
 
The Opale-Parmodels Team 
 

 
 

Safety Information 

 
 
 
 
 
 

You should be properly insured according to the country regulation you are using 
our  equipment  in.  You  hereby  accept  the  inherent  risk  of  flying  radio-controlled 
models. 
Using our equipment in a bad way may increase risks. Neither Opale-Paramodels 
nor  any  other  seller  will  be  liable  for  any  damage  caused  by  any  accident 
whatever  the  circumstances  are.  The  way  our  equipment  is  used  is  incumbent 
upon the final user, including towards the law. 
 

Summary of Contents for Trike M













Reviews: