SAFETECH ST60
SAFETECH ST60
O p a l e - P a r a c h u t e s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
[email protected] +33(0)981 144 387
© Copyright 2016 - Opale Aerosystem SARL - Tous droits réservés
Assembling
The arming rod has to stand out at the base of the
tube..
Lock the arming rod with the “Remove Before Flight”
pin.
Arrange the horn on the servomotor. Push it up on
the highest position. Then place the horn in the posi-
tion shown on the picture.
This position correspond to the Ejection status.
Check that the horn is able to reach this low position
during a move. The pin must be place on the second
hole of the arming rod.
This position correspond to the Locking status.
Arrange on top of the tube, a piece of adhesive foam
provided.
8
