manualshive.com logo in svg

Opal-RT OP5700, Installation And Configuration, Page: 4 / 4

Share
Download
Opal-RT OP5700 Installation And Configuration Download Page 4

Connecting the USB Cable

The USB(A)-USB(B) cable is required only to reprogram the FPGA using the JTAG port when programming has been lost or damaged. Contact 
Technical Support for all FPGA programming issues.

Connect one end to a Windows PC USB port and the other end to the USB JTAG port on the OPAL-RT simulator, then follow the technical support 
representative’s instructions to reprogram the FPGA.

Summary of Contents for OP5700

Page 1: ...er before servicing OPAL RT simulators and hardware devices may be subjected to electromagnetic interference EMI when installed in proximity to other devices Make sure to connect the ground to the rac...

Page 2: ...rocedure is only used for test purposes when no external source is available The loopback kit included in the starter kit allows users to test system signals The connection is made easy with a custom...

Page 3: ...tion options via optical fiber recommended or via legacy copper cable The synchronization link must be daisy chained between all chassis participating in the simulation The system which is configured...

Page 4: ...AG port when programming has been lost or damaged Contact Technical Support for all FPGA programming issues Connect one end to a Windows PC USB port and the other end to the USB JTAG port on the OPAL...

Reviews:

No comments