ooznest C-Beam Machine, Assembly Instructions Manual

Page: 29 / 40

C-Beam Machine Wiring & Commissioning 27
4.2.2 Configuring The Firmware
A. Under the Command heading there is a text input field where G-Code commands can
be sent to the CNC-xPro. To bring up the current firmware settings type ‘$$’ and press
enter.
B. In Appendix B we have provided a set of recommended settings. As can be seen, the
default settings do not match what we recommend. Each setting has an id number
and a value, and in order to change a setting to a new value, enter $id = new value.
For instance, setting number 100 is incorrect when compared to Appendix B, correct it
by entering $100 = 200. Do this for all the settings in Appendix B.
C. If interested, it is a good idea to read the GRBL Firmware Wiki for more in-depth infor-
mation: https://github.com/grbl/grbl/wiki