ooznest C-Beam Machine, Assembly Instructions Manual

Page: 16 / 40

C-Beam Machine Power Supply Assembly 14
2.3.4 Mounting
A. In the orientation above attach 2 x PSU-Mounts to the 24-360W-Power-Supply using
2 x M4-Cap-Head-6mm Bolts. The longest side of each PSU-Mount goes against the
24-360W-Power-Supply.
B. Bring the 24-360W-Power-Supply to the rear left of the C-Beam Machine, and secure
it through the PSU-Mounts to the top of the V-Slot-2060-500mm using 2 x M5-Low-
Profile-8mm Bolts, and 2 x M5-Tee-Nuts, these have to be inserted from the end of
the extrusion.