36
ONYX Flexible-arm
User’s Guide
Problem
Solution
ONYX is connected to a television, but
no magnified image appears on the
television screen.
Ensure that the television is plugged into
the wall outlet.
Ensure that the television is on and set
to AUX or VIDEO channel.
Ensure that the television cable is
securely connected to the ONYX video
box.
Ensure that the television connector
cable is securely connected to the
appropriate video input jack on the
television.
Nothing happens while pressing buttons
on the remote control.
Your camera and remote control are
matched through firmware. If you use a
remote control that is paired with another
camera, refer to
Pairing a Remote
Control with a Camera
on page 28 for
procedures describing how to match the
two devices.
