ONYX Flexible-arm
User’s Guide
5
Getting Started
Assembling ONYX
Before beginning the assembly, place the ONYX components on a sturdy and stable work
surface, such as a desk or table. Assembly is straightforward and will be very familiar to you
after setting it up for use and breaking it down for travel.
Clamping the ONYX Flexible-arm to a Table Edge
Note:
Before beginning assembly, locate a sturdy and stable work surface, such as a table
edge with at least two-inches of depth to mount the ONYX Flexible-arm.
Do the following to attach the ONYX to the edge of a table, counter, or desk:
1.
Loosen the screw on the mounting clamp.
2.
Position the mounting clamp over the edge of a table, counter, or desk.
3.
Securely tighten the screw on the mounting clamp.
4.
Place the flexible arm on the clamp’s post.
Camera Assembly
1.
Attach the camera to the camera arm connector.
