DX26/DX32 OPERATOR MANUAL
15
Rev 4 –11/4/2021
Drainage of Water Tank
For safety:
please stop and place the machine on the level ground and shut down the
machine and take out the key before leaving or maintaining the machine.
After each use, the wastewater tank shall be drained and cleaned. The clean water tank
shall be periodically cleaned to remove any corroded parts. Move the machine to a
drainage location (drain), switch off the key of the power supply, and drain the water
according to the following drainage instructions:
Drainage of Wastewater Tank
1.
Unscrew the drain hose cover of the
waste water tank drain hose
counterclockwise and drop the hose
into waste water drain.
2.
Open the cover of the waste water tank
and flush the waste water tank with a
hose using fresh water.
3.
Rinse the waste water filter screen and
remove any debris from inside the
waste water tank.
Battery Charging
Note:
To prolong the life of the battery and ensure the optimum efficiency of the
machine, the battery must be charged after the use time of the machine exceeds 30min.
Please do not allow the battery to remain uncharged for long.
The following charging instructions are suitable for the charger. Please ensure to use the
charger provided with the machine to avoid battery damage. The specification of the
battery charger:
●
Charger type: - charger for aluminum acid battery
●
Output voltage - 24V
●
Output current - 15A