background image

3

2. INTRODUCTION

2.1 Generalities

Congratulations  for  choosing  ONWA's  marine transceiver KV-300. This product  
is a high performance, mobile VHF DSC marine transceiver. The following are its 
principle features:

 

Equipped with all international channels

 available (correctly assigned).

 

High  transmission   power   of   25W

, which allows the user to maintain contact 

    from large distances, and a low transmission power of 1W to reduce consump-
    tion during short-distance communication.

 

Principal   commands   duplicated   on   the   microphone

 for faster accessibility

     channel selection and channel 16 recall.

 

Back   li t    LCD    display   and  adjustable   contrast

constantly shows 

KV-300

's 

     parameters and settings and occurs an optimal visualization.

 

Possibility   to    program   20    private   channels

    by     means  of    the    optional 

      programming  kit 

PRG 

KV-300

 

Extraordinary capability for water resistance

 

Recall button for Channel 16

for  instant  access  to  channel  16(the universal 

     marine channel for emergency contact).

 

NMEA connection

use the interface cable supplied for easy  connection  from   

    transceiver  to  optional  GPS  system, such  as  KP-32 or other compatible GPS. 
    Once  connected, the  display will show the automatically updated coordinates 
    (latitude and longitude) and time data.

 

DSC Digital Selective Calling

 

for  security  on  the  water  and the ability to 

     make quick calls automatically (the transceiver supports DSC (Digital Selective  
      Calling)    operations    with   a   specifically   designed   DSC   unit   which  conforms 
     to the ITU-R standard, M493-11 Class D requirement).

 

MMSI directory,

  which simplifies the sending of DSC calls to frequently called 

     contacts and allows viewing of contact name on the display.

 

Mounting  on   adjustable  bracket

  for  stable  and  comfortable  positioning In 

      any  condition.

 

Connection  to an external speaker

 (optional) for listening to communications 

     further away from the transceiver.

We  remind that the use of private channel 

     is controlled by the national competent authorities: for this reason, we suggest 
      you contact the local radio communcation authorities.

conforms  to   the   with   Japanses 

     Industry Standard level JS7 or IPX7.

Summary of Contents for KV-300







































Reviews: