Onwa KV-300, Operator'S Manual

Page: 25 / 38

9. RECEIVING A DSC CALL
When the user receives a DSC call, the transceiver will automatically respond
according to the type of call.
Information shown on the LCD display will vary according to the type of call.
9.1
When the transceiver receives an individual call, it automatically move to the
channel indicated by the DSC signal and emits a tone to alert the user of an
incoming call.
LCD Display scrolls INDIVIDUAL ROUTINE FROM 888888888 (MMSI) ON
CHANNEL 6(OTP)
The pressure to the function key MENU/SELECT will deactivate the alarm
and display While the other replies CALL
EXIT press 16 to exit or PTT.
The MMSI owner code contained in the signal appears on the display.
When you hear the alarm sound, with UP / DOWN keys to select "DISABLE ACK"
and "ENABLE ACK" If you select ENABLE, Press MENU / SELECT confirm, tran-
smitting a return signal to the caller, the device automatically go to work can be
normal call channels (channels with the other settings), if you choose DISABLE,
Press MENU/SELECT confirm, the device automatically go to the original work
can be normal call channel.
If the MMSI owner code has been programmed previously with name in the dire-
ctory, the name of the caller appears too.
Every time KV-300 receives a individual call an entry will be stored in the list of
registered calls LOG .
Receiving a individual call
"
"
" "
9.2 Receiving a Group call
When the transceiver receives a GROUP call ,an acoustic alaem will sound, the
LCD displays "GROUP CALL FROM MMSI ON CHANNEL 6(OTP)
The pressure to the function key
MENU/SELECT will deactivate the alarm and
display
The display will jump to the corresponding channel
After receiving the alarm ,EXIT press 16 to exit or PTT
Every time KV-300 receives a GROUP call an entry will be stored in the list of
registered calls "LOG".
21