2
Customized defog setup in case the fog environment may affect the video quality. It is to enhance video
resolution.
1.2.10 3D noise reduction
Support 3D noise reduction setup to reduce the camera noise under the low illumination environment. It is to
enhance video quality.
1.2.11 Action on Alarm
This series quick installation HD speed dome has 7 alarm inputs (normal open or normal close) and 2 alarm
outputs (normal open). Alarms can be individually programmed to associated activation action(s) when
received. .
1.2.12 Auto Flip
As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180 degrees
and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the dome.
1.2.13 Self-diagnosis
There is a self diagnosis procedure when dome boots up.
z
Tilt and vertical engine check
z
Camera diagnostics (mainly zoom function diagnosis)
z
Display dome information.
1.2.14 Day/Night Mode (B/W & Color Mode)
Auto/manual switches in low illumination. There are several modes such as photoresistor, auto, manual and
etc. This function needs the speed dome driver (camera) supported.
1.2.15 Auto Focus
Support camera auto focus function.
1.2.16 Backlight Compensation
Balance the brightest and darkest sections of a scene to produce a more vivid picture.
1.2.17 Pan Tilt and Zoom
Supports zoom in and zoom out during tilt and pan movement.
You can still get vivid image even you set auto focus and auto iris during this period.
1.2.18 FD 3D Intelligent Positioning
Support 3D intelligent positioning function. The speed dome can auto track to the specified zone.
1.2.19 Idle Status
When there is no available order for specified duration, you can use menu to set dome idle status.
1.2.20 Image Stabilizer/Flip
You can enable image stabilizer function and flip in the menu.
When there is vibration, this IS function can guarantee video stability and when flip, you can view video
more clearly.
This function needs speed dome driver (camera) supported.
1.3
Quick Configuration Tool
1.3.1 Overview
Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it
to upgrade the device.
Please note the tool only applies to the IP addresses in the same segment.
1.3.2 Operation
Double click the
“
ConfigTools.exe
”
icon, you can see an interface is shown as in Figure 1-1.