16
PRESET
AUTO PAN
AUTO SCAN
AUTO TOUR
AUTO PATTERN
IDLE FUNCTION
TIME TASK
NEXT PAGE
BACK EXIT
DIGITAL ZOOM :
：
OFF
PICTURE FLIP
：
OFF
FREEZE FUNC
：
OFF
CAMERA FACTORY DEFAULT
CAMERA RESTATRT
BACK EXIT
DEFOG MODE
：
OFF
INTENSITY
：
1
LIGHT INTENSITY MODE
：
AUTO
LIGHT INTENSITY LEVEL
：
14
BACK EXIT
Move the cursor to DEFOG and then click confirm button to go to the submenu to set.
z
DEFOG MODE: It is to set camera defog mode. It includes: manual/auto/off and etc. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
z
INTENSITY: It is valid when the defog mode is manual. Please use the left/right button on the keyboard
or in the speed dome terminal menu to set. The large the value is, the clearer the picture is.
z
LIGHT INTENSITY MODE: It is to set air light intensity mode. It includes two modes: auto/manual.
Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
z
LIGHT INTENSITY LEVEL: It is to set air light intensity value. It is valid when the air light intensity mode
is manual. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
2.4.3.9
Next Page
Move the cursor to NEXT PAGE and then click confirm button, you can go to the submenu.
z
DIGITAL ZOOM: You can use the left/right button to enable/disable the digital zoom function.
z
PICTURE FLIP: There are two options: on/off. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z
FREEZE FUNCTION: This function allows the system from one preset to another preset, without
showing the video during the PTZ movement. There are two options: on/off. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z
CAMERA FACTORY DEFAULT SETTING: Move the cursor to current item and then click confirm
button to restore factory default setup.
z
CAMERE RESTART: Move the cursor to current item and then click confirm button to reboot the
camera.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
2.4.4 Function
Setting