13
CONTROL MODE
：
AUTO
3D NOISE MODE
：
HIGH
3D NOISE TNF
：
OFF
3D NOISE SNF
：
OFF
BACK EXIT
z
GAIN SETTING: It is to set camera gain. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z
SHUTTER: It is to set camera shutter speed. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z
IRIS SETTING: It is to set camera iris value. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z
EXPOSURE COM: It is to set camera exposure compensation. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z
SLOW AE: In the strong light environment, you can lower the camera exposure speed to capture the
image and enhance the definition. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
z
SLOW SHUTTER: In lower illumination environment, you can lower the cameras auto exposure time to
capture the image and enhance the definition. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z
NEXT PAGE: It includes: AUTO GAIN LIMIT, SLOW SHUTTER LIMIT, NOISE REDUCTION, 3D
NOISE REDUCTION, BLC, EXPOSURE RESTRAIN, WDR, AE RESUME, BACK, and EXIT. Move the
cursor to the item and then click the left/right button to set.
o
AUTO GAIN LIMIT: It is to set auto gain threshold. Please click the left/right button to set.
o
SLOW SHUTTER LOW LIMIT: Please click the left/right button to set.
o
NOISE REDUCTION: There may noise when the camera is monitoring the low illumination
environments. You can use the digital filter to process the noise to guarantee the clear video.
o
3D NOISE REDUCTION: It is to set the speed dome 3D noise reduction setup. There is the
fourth menu. Please move the light to highlight current item and then click the OK button to
go to the next level menu.
o
BLC: It is an abbreviation for back light compensation. System can compensate the object in
the dark light to achieve a clear video. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
o
EXPOSURE RESTRAIN: It is to restrain the abrupt high light on the video in case it affects
the video quality. Please click the left/right button to set.
o
WDR SETTING: It is an abbreviation for wide dynamic region. Please make sure your
camera supports current function. This function can adjust the video brightness when the
contrast between the strong light and the dark light is too high. There is the fourth menu.
Please move the light to highlight current item and then click the OK button to go to the next
level menu.
o
AE RECOVERY: Manually click the “+” and “-“button on the PTZ interface, system cam
resume previous exposure value after specified time (The exposure value does not resume
if this function is off.).
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
2.4.3.3
3D Noise Reduction
Move the cursor to 3D NOISE REUDCTION and then click confirm button, you can go to the submenu.