v1.12
Cloudberry Management – PTP Management User Manual
- 14 -
1.2.8 Configuration popup
In order to change some of the settings you can double click or right click on the unit. A small
popup screen will appear with several choices. The different choices are described below.
1.2.8.1
Set IP address
Here you may change the IP address, mask, gateway for both CPUs and enable/disable the
DHCP client for the PTP CPU. Note that the mask and gateway of the switch CPU is
automatically set to the mask of the PTP CPU. This is done in order to avoid mis-
configuration of CM-1600.
After apply is pressed the settings are stored permanently. The main frame of IPSet shall
reappear and the new settings shall be reflected here.
