Introduction
5
T
Do not spill any liquids on your OnStream SC30/SC50 Digital Tape Drive.
T
Attempting to remove the cabinet from your OnStream SC30/SC50 Digital Tape
Drive voids your warranty.
T
Do not drop, jolt, or expose your OnStream SC30/SC50 Digital Tape Drive to
excessive force.
T
Installing your OnStream SC30/SC50 Digital Tape Drive requires that you
remove the cover from your computer when indicated. Before removing the
cover from your computer, make absolutely certain that the computer and all
peripherals (e.g. a printer) are all turned off and unplugged at the wall outlet.
Caution!
Unplug your computer and all attached devices when instructed.
T
Static electricity can destroy sensitive electronic devices. Your OnStream SC30/
SC50 Digital Tape Drive is sealed, and upon being correctly installed in your
computer, is grounded to prevent damage from static electricity. Do not touch
any of the components inside the drive. Handle your OnStream SC30/SC50
Digital Tape Drive using the anti-static bag in which is it packed as much as
possible.
Attention!
Observe precautions for handling static-sensitive devices.
Your OnStream SC30/SC50 Digital Tape Drive
This section describes the front and rear panel layouts of your OnStream SC30/
SC50 Digital Tape Drive.
Front panel
The front panel of your OnStream SC30/SC50 Digital Tape Drive is shown in
Figure 3.
Figure 3: OnStream SC30/SC50 front panel
2
3
1
SCSIInstallGuide.book Page 5 Tuesday, January 19, 1999 1:04 PM
