16
Installation Guide
Installing the Software
Your OnStream SC30/SC50 Digital Tape Drive is almost ready to use. Just
follow the server or workstation software installation instructions below.
Installing your Server Backup Software
If you installed your OnStream SC30/SC50 Digital Tape Drive on a server, install
your server backup software and skip to the next section. Refer to your server
backup software user documentation for complete installation instructions.
Installing OnStream Echo for your Workstation
If you installed your OnStream Digital Tape Drive on a workstation, all you have
to do is install the OnStream Echo software.
To install the OnStream Echo software, follow these steps:
1.
Turn ON your computer and allow it to boot.
2.
When your computer starts, Windows may detect that new hardware, your
OnStream SC30/SC50 Digital Tape Drive, has been installed. If this happens,
you will see a dialog box like the one shown below. Press Cancel and continue
to the next step.
Figure 14: Windows New Hardware Found dialog box: Press Cancel
OnStream Echo installs the driver for your OnStream SC30/SC50 Digital Tape
Drive later.
3.
Insert the OnStream Installation CD-ROM into your CD drive. The OnStream
CD Setup program starts automatically.
¯
Press Cancel if
you see this
dialog box
SCSIInstallGuide.book Page 16 Tuesday, January 19, 1999 1:04 PM
