Chapter 2: Setting up the System
HOBO U30 Remote Monitoring System User’s Guide
17
Alternate method:
Place expander (without the screws) onto the
standoffs. Apply a small amount of clear grease (the grease supplied
with this kit can be used) at the end of the screwdriver to hold
screws while lowering them into place.
Figure 10: Alternate method for
installing Smart Sensor expander
Install Expander Cable:
7.
Plug one end of the supplied expander cable into the rightmost jack
of the expander board and the other end into the rightmost jack of
the built-in board as shown.
Figure 11: Installing expander cable
Chapter 2: Setting up the System
18
HOBO U30 Remote Monitoring System User’s Guide
Step 5: Plug in all Smart Sensors into the HOBO U30 Station (if not
already plugged in) making sure all cables are routed through the cable
access opening(s).
Keep in mind that any Smart Sensors plugged in after
logging has already begun will be ignored.
Figure 12: Smart Sensor cables pulled through
cable access openings
