11
SETUP - LEARNING
Your ONN remote control can learn any function from any other wor-
king remote control. This is a quick and easy one-time setup that allows
you to control any infrared controlled device you have in your living
room. It also allows you to add a key or keys that may be missing to a
spare key on the ONN.
To do this, firstly make sure you have all your original remote controls to
hand, and that they have working batteries in.
To learn functions, the original remote should be approximately 2-5 cm
from the ONN remote, pointing towards it:
1.
Press the Device key for the device you want to learn
functions onto (e.g. TV).
2.
Hold down the Setup key until the LED under the
Device key blinks twice.
3.
Press 975 – the LED should blink twice.
4.
Press and release the key you want to learn a function
onto (for example the Power key) –
the LED will begin to flash rapidly.
5.
Press and release* the corresponding key on the
original remote, for example Power.
6. The LED will blink twice to indicate the key has been learned
correctly.
7. Repeat steps 4 and 5 for each key you want to learn – remember
you can learn from multiple remotes, but only
one function per key.
8.
When you have learned all the functions you require,
press and hold the Setup key until the LED blinks
twice.
* Some remotes send commands differently. If you find a function
cannot be learned, try holding down the key on the original remote
instead of pressing and releasing.
Hints:
• If the LED shows one long blink at step 5, the function was not
learned correctly, please try again from step 4.
2 - 5 CM
2 - 5 CM
ONN_6_Eng_Manual RDN1010321.indd 11
ONN_6_Eng_Manual RDN1010321.indd 11
26-02-2021 14:28
26-02-2021 14:28
