background image

 

ENANCER Electrónica S.A.

 

 

Page 10 of 13

 

Rua Max Grundig 9 

 

 

 

4705-820 Braga Portugal                                                                                                                                             [email protected]                                                                                                                                                                                                            
Tel: +351 253 221 484                                                                                                                                                 www.only-smartbuildings.com 

 

OPERATION 

 

OTC-CLIMA 

 

When the OTC-CLIMA is switched off, touching the panel will only light up the LED 
of the   key. This means that the only possible operation is switching the unit on or 
off. 
 
To switch on the unit press  : you will hear two beeps indicating that the unit is on 
and the LEDs of some other keys light up. 

 

Manual operation 
The OTC-CLIMA can operate in automatic and manual mode. To operate in 
automatic mode it is necessary that the unit has the date and time adjusted. If this is 
not the case, the unit can only function in manual mode. 
If the display shows only the temperature, this means that there is no date and time 
adjusted. 
In this case, when you switch on the unit with the   key, it automatically goes to 
manual mode. This is indicated by the LED of the   key that blinks or lights up. 

 blinks  - unit switched on but climatization switched off 
 lights up 

- unit switched on and climatization switched on 

In this last case the LCD indicates 

 if it is cooling or 

 if it is heating up. 

During manual operation the ideal temperature is the one that is previously adjusted 
for the respective season. 
If desired, you can edit the target temperature by pressing the keys   to increase or 

 to decrease. 

 

Automatic operation 

 

If the date and time are adjusted, the display shows the time. In this case, when you 
switch on the unit it goes to automatic mode.  
If the actual time is outside of any defined operating period the unit stays in 
STANDY, waiting for an operating period to start. 
In this case the   key does not light up, indicating that the climatization is switched 
off. 
Pressing the   key switches the unit on in manual mode. The target temperature is 
the defined ideal temperature. Climatization is switched on if necessary.  
As an alternative, you can press   in winter or   in summer. In this case 
climatization is always switched on being the target temperature the actual 
temperature plus (winter) or minus (summer) 1º. 
When the time reaches an operating period, the defined target temperature of that 
period is selected and the unit switches to automatic mode.  
When the program ends, climatization is switched off.  
 
To switch off the unit, press   for more than 1 second. 
 
 
 
 

1234567 

                23º 

    1234567 

                23º 

     1234567 

 10:12      23º 

1234567 

                23º 

Summary of Contents for Climatization














Reviews: