Functions with master code
The master code can be entered via telephone as follows:
•
Call your house and wait until you do not hear the call
signal anymore.
•
Press #
•
Type in the master code. Ex:
123456
•
Press # again: the identification message starts to be
played over and over again.
Now you can select the messages you wish to record:
0
– identification message (6 seconds)
5
– message for key 5 (3 + 3 seconds)
6
– message for key 6 (3 + 3 seconds)
7
– message for key 7 (3 + 3 seconds)
8
– message for key 8 (3 + 3 seconds)
The other messages are fixed and cannot be changed.
The messages for keys 5 to 8 have 2 parts, one for ON and
one for OFF. Each of them has 3 seconds.
The message 0 is 6 seconds long and is played in all voice
calls made by the central alternatively with the event
message.
To record a new identification message proceed as follows:
•
Press 0: the identification message is played over and
over again
•
Press # to start recording: speak your message into the
telephone. After 6 seconds the recorded message is
played back over and over again.
If you wish you can record the message again by pressing #
to start over.
To record a message for keys 5 to 8 proceed as follows:
•
Press the respective key (e.g. 5): the respective
message is played over and over again.
•
Press # to start recording: Speak the ON message into
the phone (e.g. “Watering switched on”).
•
After the time for the ON part finishes (~3 seconds) you
will hear a beep.
•
Speak now the OFF message into the phone (e.g.
“Watering switched off”)
•
After the time for the OFF part finishes you will hear both
the on and the off messages over and over again (e.g.
“Watering switched on” “Watering switched off”).
If you have finished recording, press * to stop the call or
hang-up your phone.