Online Technologies Limited
- 10 -
Audio Transfer from Headset to cell phone
Make sure the Headset is on an active call.
Press and hold Talk button for 2 seconds.
Audio Transfer from cell phone to Headset
Make sure there is an active call.
Press Talk button of the Headset.
Last Number Redial in HF mode.
1. Make sure the Headset has an RFCOMM connection with an cell phone (in
HandsFree mode) OR there is an SCO connection with an AG (in Headset
mode).
2. Press and hold the TALK button for 5 seconds will request the Cell phone AG
to perform the last number redial functionality. The feature is only supported in
HF mode.
Reject Incoming Call in HF mode.
1. The Headset plays a RING tone whenever there is an incoming call.
2. Press and hold the TALK button for 5 seconds will answer the incoming call.
Using the Headset with several cell phones.
Before the headset can be used with your phone, the phone has to be paired with
the headset. The headset can be paired with up to 5 phones but connected only
one phone at a time.
The phone that was last used with the headset is called the “last used phone”.
If the headset is switched on within 10 meters of several paired phones, the
headset will try to connect to the “last used phone” within a few seconds.
If the headset cannot connect to the “last used phone”(because, for example, it is
switched off its user rejects the connection), the headset tries to connect to the
other used phones within a few seconds.
Reset the Headset.
You can reset the headset to the original settings to, for example, change the
default user of the headset.
When you reset the headset, all of its settings, including pairing information, are
cleared.
To reset the headset: Press and hold the TALK button for 10 seconds. After the
headset has been reset, the headset beeps twice and power off.
